Products
Home > Products > Low Temperature Retraction Tester
Low Temperature Retraction Tester
Functions
-
Data produced by the instrument:
a. TR test: TR10. TR30. TR50. TR70. TRx1, TRx2 (x1, x2 customer defined)
b. Time from test start at calculated TR points -
Graphic representation:
a. Retraction percentage versus Temperature Curves for the 6 samples tested.
b. Temperature versus Time curve during test. -
Automatic performance of the test with adjustment of the thermal cycle and automatic release of the samples on termination of the conditioning time depending on the test procedures used.
-
Graphic representation of Retraction curves for each of the 6 samples and of Test Bath temperature during test.
-
Possibility of testing groups of different samples with different percentage elongation during the same test.
-
Calculation of the significant test results for each sample.
-
Calculation of average and standard deviation for each group of samples tested.
-
Setting of tolerance limits for conditioning temperature to verify correct pre-start conditioning
Features
-
The standard model UD-4000 consists of one main testing unit and one subunit of touch-screen monitor.
-
Manufacturing Standards: ASTM D 1329, ISO 2921, JIS K 6261
-
Temperature: -70℃ ~ 0℃ (depending on heat transfer liquid used)
-
Temperature resolution: 0.1℃.
-
Temperature check: By means of heat regulator with PID microprocessor with 0.1℃ accuracy.
-
Cooling system: Liquid nitrogen with internal heat exchanges.
-
Test Chamber: Test chamber capacity of 5 liters.
-
Chamber material: Stainless steel.
-
Sample holder: 6 samples
-
Instrument dimensions: 500 * 500 * 1900 mm (W * D * H)
-
Weight: 210kg.
-
Electric Supply: AC 220V±10%, 50Hz ± 3Hz, 4A, Single Phase.
or discretionary at user needs.
For more detailed information please contact us: U-CAN DYNATEX INC.
