WORLDWIDE
Home / Product Line
Rotorless Rheometer Taiwan,Rotorless Rheometer production
U-CAN DYNATEX INC. has a wide variety of Rotorless Rheometer for many different applications. With many years of experience, we have the core technical knowledge for Rotorless Rheometer to satisfy our customers' demands. Our Rotorless Rheometer is known for their long work life, easy handling, and low maintenance. This has been possible with the use of the best raw materials that go into the manufacturing of our expansive product line. Thank you for visiting our website and we hope you enjoy our products as much as we do.
MDR-U6S
Rotorless Rheometer
1.Simple, quick installation.
2.Indicate test results as pass or fail using LEDs of different colors.
3.Great repeatability and reproducibility because of noise-resistance circuit and DFT algorithm.
4.New mechanical design to keep stable torque transmission.
5.Build in controller calculate and analyze the signal independently without computer.
6.Able to calibrate loss angle automatically.
7.It would not exceeding 2 min and 40 seconds when heating up from room temperature to the
equilibrium of 170℃±0.3℃
8.Time needed for changing temperature :
From 170℃ to 190℃ and reach the state of equilibrium 190℃±0.3℃.....within 55 seconds.
From 190℃ to 170℃ and reach the state of equilibrium 170℃±0.3℃.....within 1min and 40 seconds.
9.During testing, die chamber temperature will be redeemed to the tolerance of ±0.3℃ within 30±3 seconds from die closure.
10.By no means of overshooting nor of fluctuating, during recovering the test temperature, i.e., the
heating-up is carried out stably and gradually without fluctuation after die closure.
11.Key components are from US, Germany, and Japan.
2.Indicate test results as pass or fail using LEDs of different colors.
3.Great repeatability and reproducibility because of noise-resistance circuit and DFT algorithm.
4.New mechanical design to keep stable torque transmission.
5.Build in controller calculate and analyze the signal independently without computer.
6.Able to calibrate loss angle automatically.
7.It would not exceeding 2 min and 40 seconds when heating up from room temperature to the
equilibrium of 170℃±0.3℃
8.Time needed for changing temperature :
From 170℃ to 190℃ and reach the state of equilibrium 190℃±0.3℃.....within 55 seconds.
From 190℃ to 170℃ and reach the state of equilibrium 170℃±0.3℃.....within 1min and 40 seconds.
9.During testing, die chamber temperature will be redeemed to the tolerance of ±0.3℃ within 30±3 seconds from die closure.
10.By no means of overshooting nor of fluctuating, during recovering the test temperature, i.e., the
heating-up is carried out stably and gradually without fluctuation after die closure.
11.Key components are from US, Germany, and Japan.
Functions :
1. In compliance with ISO 6502, ASTM D5289, JIS K6300-2, and GB/T 16584.
2. Provides various cure data and graphical curves.
For more detailed information please contact us: U-CAN DYNATEX INC.
#hardness testing #load testing machine #physical testing
#compression set #friction testing
U-CAN DYNATEX INC. has been the world leader in manufacturing Rotorless Rheometer, to achieve the customer's needs, we had to obtain a maximum level of performance, business, and manufacturing excellence. Renowned for their higher efficiency, accuracy and durability, our Rotorless Rheometer is setting standards of performance and high quality in the entire market. U-CAN DYNATEX INC. is committed to developing Rotorless Rheometer that ultimately create innovative products that exceed customer expectations. Thank you for your time and business, if you have any questions or needs, please do not hesitate to contact us.